Voltlog #262 – Is This The Future of Our Hobby?

To be honest I didn’t think we were going to have services like these available so cheap so fast. I mean yes I know pcb prices have been so low in the past couple of years that it no longer makes sense to etch your own PCBs, unless you are in a big hurry. But having smt assembly service so cheap? Soon enough it would not make sense to hand assemble these boards because it would be equally cheap to have them assembled at JLCPCB

Voltlog #260 – How do you test usb to serial converters? (CP2103 vs CH340E vs FT232RL)

Welcome to a new Voltlog, today we’re comparing a few different serial to usb adapters and the discussion started ever since I showed the CH340E breakout board I designed in voltlog #249. People wanted to know if this CH340E affordable chip would perform similar to the well known FTDI or Silicon labs chips, and I’m thinking at high throughput and reliability here, the kind of application where you are sending lots of data, fast and you need it to be transferred reliably.

So today I’m going to compare the CH340E with a CP2103, and the FT232RL. I wasn’t sure what measurements to take and how to test these but I devised 2 testing methods.

Voltlog #214 – How bad is a fake apple lightning to 3.5mm audio adapter?

Welcome to a new voltlog, today we’re taking a look at these lightning to 3.5mm audio adapters that you have to use ever since apple removed the 3.5mm jack on the iphone. So you know the story, apple removed the jack and said it’s because they will free-up space inside the phone and it makes it more waterproof but if you ask me that’s bullshit, they removed it to force people to buy bluetooth headphones. But anyway we won’t go into that, this video is about the adapter that they now give people to still be able to use the 3.5mm jack for audio.

This made me wanna take a closer look so here are the two adapters, the plan is to connect a 3.5mm jack, this will provide me with some contacts where I can probe with the oscilloscope. I’m gonna generate a known constant waveform from an app and we’re going to measure that and compare between the two adapters.

Voltlog #146 – Is My NEO M8N GPS Module Fake?

Welcome to a new voltlog, today we are taking a closer look at the NEO M8N GPS Module that I showed getting in a recent video. A few people mentioned in the comments that there are a lot of fakes being sold on ebay so I should check mine to see if I got a fake or not.

NEO M8N GPS Module Links (probably fakes):

VolLog #129 – Ebay Bussmann Fuse vs Genuine Bussmann Fuses DMM-B-44/100-R

If you remember Voltlog #117 in that video we analysed some ebay Bussmann fuses to try and figure out if they are fake or real fuses. The ebay fuses we’re way cheaper than anywhere else so that made me suspect they are not genuine.

It’s good to know if the ebay fuses are real or not because they are selling allot of them and people might be relying on these to perform as required when in fact they might be out of spec. For the average bench user which only occasionally goes up to 240VAC it might not be an issue if the fuse is slightly outside the specs but if you are probing some high energy circuit and relying on the ebay fuse to perform according to the datasheet at it is not then something serious might happen, like the multimeter could explode because of a high energy discharge or it could simply damage the meter which is to be avoided.

Links for the products and test equipment shown in this video:

 

Voltlog #117 – Ebay Bussman DMM Fuses Fake or Genuine?

In this video we’re going to do some tests on these ebay fuses to try and determine if they come close to the specified ratings of the original fuse.

Links to products shown in this video: