Tag: Quality

Voltlog #296 – Microscope Camera Focus Issue Fixed!

Welcome to a new Voltlog, as you may remember in Voltlog #282 I got a new trinocular microscope and then in Voltlog #292 I got a new camera because the one shipped with the microscope had issues. Banggood till this day did not replace the camera which I believe is defective, they kept asking me to try these various settings in the camera menu to improve the brightness but none worked.

Now to get a good image and have both the camera in focus and the eyepieces you will need some kind of reduction, an optical adapter between the camera and the microscope port. So first I got this SZMCTV 0.3X adapter, after reading some reviews who were claiming this will give the best field of view.

After installing this adapter I noticed the field of view was almost the same as through the eyepiece which is great but I couldn’t get it in perfect focus with the limited adjustment available on the adapter and I was getting this tunnel vision which I couldn’t quite explain but it was obviously not what you want to see.

And so I got this newer wide body 0.5 adapter and installed it on my microscope and the problem was solved I could now get my camera into focus at the same time with the eye pieces but with a loss in the field of view due to the 0.5x adapter. Getting the SZMCTV 0.5X adapter would probably also work, that’s a bit cheaper, but I went with the recommendation of getting the newer type of adapter with better optics.

Voltlog #285 – Is a Cheap Cordless Power Drill Any Good?

Is a cheap cordless power drill any good? That is a question I’ve been asking myself for a while now because I was in the market for a cordless power drill. I can get a well known brand like Makita which sells a kit with two 18V 3Ah batteries, the drill and a charger for about $200. The thing is I’m using a tool like this maybe once every 3-4 months for a couple of drills, generally soft materials or maybe to assemble some new piece of furniture and I don’t feel like spending $200 for a tool that’s not going to be used and worked for that money.

So I started looking at alternatives, there are the clones of Makitas and Dewalts available for probably less than half the price of the genuine stuff but why go that route? I don’t care about what’s written on the label and the color of the drill.  One thing I care about is the shipping of the item, preferably I would like something that can be ordered and shipped from the EU for fast delivery and no additional taxes being paid for customs.

So I started looking at Chinese brands, this particular model got my attention on banggood.com, they call this a 36V cordless drill, it comes with two batteries and it’s available from a warehouse in the EU.

Voltlog #282 – Did I get a trinocular microscope for micro-soldering and inspection?

Welcome to a new Voltlog, to save you from waiting, the short answer is yes, I did get a microscope for the lab but before I show you the microscope let’s talk about why I got a microscope and why you might want one. If you are occasionally soldering boards, electronic kits, mostly through hole components or even surface mount down to 0603 and you have good eyesight, then chances are, you don’t need such a microscope, I’ve been doing that for years.

On the other hand, if you want to be able to solder surface mount components smaller than 0603 comfortably or you want to do board level repairs on modern gadgets like smartphones and laptops, then you most definitely need a microscope as it will massively improve the quality of your soldering and the general repair process at your bench. 

Voltlog #256 – Best BST-863 Hot Air Rework Station (Alternative to Quick 861DW)

Inside the box of the BST-863 we have the station, a really nice and heavy stand for the tool piece, a total of 3 nozzles, a grounding strap and a power cord. The first thing I notice is the hose which pretty thick, certainly thicker than what I had on my old Gordak station but seems to be softer material. The way it’s designed with the tool standing vertically in the stand makes the air hose forms this loop which depending on your bench setup might or might not bother you but it’s something to consider. But I like the quality of the stand, it’s heavy and feels very sturdy, you get this accessory here which allows you to remove the nozzles while hot and the station has a sensor to detect when the handle is in the stand.

Adjustment of temperature and air level is made through this touch screen control. I’m a bit anti touch screen control on test gear so I would’ve preferred some switches on the front panel but don’t get me wrong, the touch screen works well on this unit, it has nice big touch keys and after setting up your presets you are likely  not going to need to adjust the temperature you will just be using the presets like leaded, lead free and another one for heatshrink maybe.

Is this cheaper station a good alternative to the Quick 861DW? This video review should provide you with enough info to decide which one to buy.

Here are some high resolution images from the teardown: