Tag: Solder

Voltlog #282 – Did I get a trinocular microscope for micro-soldering and inspection?

Welcome to a new Voltlog, to save you from waiting, the short answer is yes, I did get a microscope for the lab but before I show you the microscope let’s talk about why I got a microscope and why you might want one. If you are occasionally soldering boards, electronic kits, mostly through hole components or even surface mount down to 0603 and you have good eyesight, then chances are, you don’t need such a microscope, I’ve been doing that for years.

On the other hand, if you want to be able to solder surface mount components smaller than 0603 comfortably or you want to do board level repairs on modern gadgets like smartphones and laptops, then you most definitely need a microscope as it will massively improve the quality of your soldering and the general repair process at your bench. 

Voltlog #267 – 60W Ultrasonic Cleaner For PCBs (review)

Welcome to a new Voltlog, today we’re going to take a closer look at an ultrasonic cleaner. This is the 1.3 litre, model number I believe is Y-009, the ultrasonic power is 60W while the heating power is rated for 100W. Usable area I’ve measured to be 125x115x40mm depth which is not a lot but I’ve thought about it and this is pretty much all I need. 99% of the PCBs I design fit within these dimensions so it’s not worth getting a bigger ultrasonic cleaner because it will take up more space and it will use up more cleaning liquid, it would be a waste of resources.

Voltlog #250 – Replacing Bad 4mm Banana Plugs With High Quality Hirschmann and Staubli

In this video I replace some of my old crappy 4mm banana connectors with some new Hirschmann and Staubli, high quality connectors. These should be more reliable and provide a low resistance connection between my test gear allowing me to pass high currents without any issue.

Voltlog #243 – TS80 VS KSGER T12 Soldering Iron Comparison

Welcome to a new Voltlog, yet another soldering iron comparison video and today it’s between the TS80 and the KSGER T12 station. Everyone knows the TS80, is quite a popular portable soldering iron, works with USB type C input, it needs a quick charge compatible adapter to reach full power and it’s quite a capable soldering iron. The drawback is the cost of the tips, it uses this proprietary type of tip and the cost is about $20 a piece.

On the other hand we have the KSGER soldering station which I reviewed in Voltlog #232. This station has a built in power supply and uses the well known T12 tips which are widely available on aliexpress, for example you can get KSGER T12 branded tips for about $3 a piece. I think that’s important, because I have 2-3 different tip shapes that I use regularly and maybe another 2 or 3 that I use occasionally for odd jobs. You can’t just rely on a single tip shape and purchasing the same number of tips for the TS80, is not going to be cheap.

Voltlog #209 – Cheap Electric Desoldering Pump Teardown

Welcome to a new Voltlog, today we’re doing a teardown of this electric desoldering pump, which I showed in a previous mailbag video. This had a major when I powered it one, in fact I’m not gonna try to power it on again because I don’t want all that smoke to fill-up my lab again.