Voltlog #193 – InTheMail

Hello everyone and welcome to a new InTheMail the series that will touch both your passion for electronics and your bank account at the same time.

In the video I am showing the following items for which you can find links in the video description on the youtube page:

  • TS100 soldering iron tip TS-BC2
  • 0.4mm Brass Nozzle 3D Printing
  • 0.4mm Stainless Steel Nozzle 3D Printing
  • Cabinet LED light
  • Rotary Encoder
  • Soft Protective Pouch
  • M3 x 40mm screw
  • M4 x 8mm screw
  • Double Sided Thermal Conductive Adhesive Tape
  • CAN SPI Transceiver Module
  • Lichee PI Nano ARM9 Computer Module
  • 24 pin Flat Flex Connector 0.5mm pitch

Voltlog #186 – TS100 VS Generic T12 Station

Welcome to a new voltlog, today we’re talking about the TS100 portable soldering iron, but this won’t be a review because there is no point in making a review video for this mode. There are only a few things you can test with a soldering iron and there are already some very good reviews on youtube from known channels.

I am however interested in how will this iron compare with the stm32 soldering station that I’ve been using for a couple of years. So if you haven’t seen this before, I’ve shown it in detail in voltlog #85, this is a station which I got about 2 years ago, directly from taobao with the help of a friend who lives in China. At that time it wasn’t widely available so it was a bit of a gamble but it payed out because it uses hakko T12 tips and I have a bunch of different models of those and it payed out because the station works great. Nowadays you can find similar models on aliexpress so I will place a link in the description below if you would like to take a look.

I am curious though to see how this would compare with the newly acquired TS100 soldering iron. The TS100 uses a similar type of tip which has the heating element and the thermocouple built in, that type of construction ensures great thermal coupling so the tip can really transfer the heat to the joint and at the same type the sensing element get’s a very accurate reading of the tip temperature and can compensate for that.

Voltlog #184 – InTheMail

Hello everyone and welcome to a new InTheMail the series that will touch both your passion for electronics and your bank account at the same time.

In this episode you will see some 18650 batteries (INR18650-30Q), 26650 batteries(INR26650-50A), TS100 Soldering Iron, Blitzwolf Night Light BW-LT9, Iphone 8 Plus or X Dual Lens Mpow, Swiss D Clips, 50mm Ear Foam Pads Replacement and a 4 position switch. Links for all of these items can be found in the video description on youtube.

Voltlog #179 – How To Solder Through-Hole Parts

In this video I’m gonna show you how to solder through hole parts. I’m gonna take you step by step through the procedure as well as give you several tips & tricks that should bring your soldering skills to a new level.

Links for all the tools and parts shown in this video are placed in the video description.

Voltlog #103 – InTheMail

Today we are taking a look at my electronics related mail, I’ve got a bunch of random stuff and links for all of them are provided below the video.

Voltlog #74 – InTheMail

A list of the items shown in this video:

  • Dual Channel Digital Thermocouple Thermometer
  • Soldering Iron Handle 50W A1322
  • Screwdriver Magnetizer / Demagnetizer Tool
  • Rechargeable NiMH Battery AA
  • AA Battery Plastic Storage Box
  • Cone Step Drill Bit HSS 4-22mm
  • Hollow Needles Desoldering Tool Kit
  • Diamond Files Set
  • Brass Standoff Assortment Kit 300pcs
  • Silicone Lubricating Oil
  • Kontakt Spray Can

Links for all of these items will be in the video description which is visible on youtube.

Voltlog #60 – InTheMail

Welcome to a new InTheMail video where I show you everything I purchase electronics related.

A list of items appearing in this video:

  • 0:10 Hakko A1321 ceramic heating element
  • 4:30 Soldering iron soft metallic cleaning sponge
  • 5:25 Alcohol plastic container 200ml
  • 6:00 Antistatic ESD working gloves
  • 7:21 Star shaped led aluminium pcb base
  • 8:00 Cree XTE White LED
  • 9:33 Pentalobe 0.8mm screwdriver
  • 10:25 Excellway CH2 Quick Wire Connector
  • 11:30 M3 x 25mm black countersunk hex screw
  • 12:27 High voltage 3V to 7KV boost module
  • 14:32 1W 350mA led driver with pwm control
  • 16:38 DHT11 humidity and temperature sensor
  • 17:23 Bi-directional 4 line level converter module

Voltlog #37 – InTheMail

Hi and welcome to a new InTheMail, this time we have allot of items to look at and some of them were ordered 2 or even 3 months ago but due to the postal service madness that happens every year during holidays they arrived a bit late.

The video is split across two parts to avoid making it too long so make sure you watch both parts.